Soehnle Oxygen Equipment 3010 User Manual download pdf (Page 10)

English

1100

2.6 Ten times resolution X10

The ten times resolution appears by pressing the -key and the Zeroing key

simultaneously.

On approved scales, the high resolution appears for 5 seconds or flashes as

long as you hold down the keys - on non-approved scales, the high resolution

appears as long as you press the -key and the Zeroing key. wird.

2.7 Switching over the scales (measuring points)

The Basic Terminal 3010 can operate 2 analogue measuring points.

Toggle between the measuring points by pressing the INFO key followed by

the -key (in succession).

2.8 Alibi memory

The alibi memory is activated in Setting mode (see separate description

470.702.078 User Mode). When the alibi memory is activated, an arrow points

to the corresponding symbol.

The arrow flashes as soon as the entered limit for full indication is reached.

Press the -key or data request to accept a value to the alibi memory. To

do this, the print template or the data record must be configured accordingly

(see separate description 470.508.059 Data Interface).

Send a request to the alibi memory (view/print entries) in Setting mode:

Press - and -keys for 5 seconds until UCAL I appears.

Press -key repeatedly until UCAL 5 appears.

Press the -key to confirm.

Then press the -key until the Setting step 03 appears.

Press the -key to confirm.

The number of the last data record saved appears. Call each data record by

changing the consecutive number using the arrow keys ( / ) and

display by confirming with the -key.

Ba_3010_GB.qxd 03.04.2008 17:07 Seite 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Soehnle Oxygen Equipment 3010 User Manual Page 10